Injection Bottle Method
Cut the Counteract bottle spout above the mark.
Remove the bottle cap and carefully pour the beads into the bottle. Attach the clear tube to the bottle cap spout.
Rotate the wheel so the valve stem is at the bottom, deflate the tire by removing the valve core and then place one end of the clear tube over the valve stem.
Invert the Counteract bottle and squeeze repeatedly to get all the Counteract Balancing Beads to flow down the clear tube into your tire.
Note: Occasionally it is difficult for the beads to move through the valve stem, particularly if the stem is narrow, or a 90 degree type stem. In those cases, it is suggested that some type of mechanical vibrating device such as a handheld engraver be held next to the stem. The tiny vibrations will help encourage the beads to travel through the stem into the tire.
Use the airline to clear the valve stem and then screw the Counteract valve core into the valve stem.
Re-inflate the tire to the
manufacturers’ recommended pressure.
Screw the supplied valve cap on.
Valve core and valve cap included inside the Counteract bag.
Disclaimer: Counteract disclaims any responsibility for air loss or tire damage due to improper installation.